KESHAB MACHINERIES PVT. LTD.
Pin Mill

Pin Mill

Send Inquiry

The Pin Mill machine is used for grinding various materials to a finer mesh. There are two sets of S.S. discs fitted with a no. of S.S. Pins. The Disc fitted with S.S.  pins, set concentrically is fixed with the body of the Mil, l remains stationary and is called the Stator. The other disc with S.S. Pins is fitted with the Shaft, rotates horizontally and is called the Rotor. The Dynamically balanced rotating Disc is fitted with two Nos. Heavy duty Bearings and Bearing Plummer Blocks. Both the S.S. Discs are fitted within a metal Casing. The Machine is driven through V-Pulley and Motor. Air pressure filter bag is provided with the machine. 

DESCRIPTIONS

ROTOR & STATOR

Made of SS / MS properly machined with

precision and dynamically balanced.

GRINDING PINS

Made of SS / MS properly machined and fitted to both the stator and the Rotor.

OUTER CASING

Made of SS / MS properly Fabricated and machined.

SHAFT

Made of SS / MS Steel fitted with Rotor, Bearing, Bearing Block, the subassembly is dynamically balanced.

FEEDING HOPPER

Fabricated from SS / MS and fitted with the outer casing at the feeding end of the Pin Mill.


SPECIFICATIONS

SIZE OF THE ROTOR

400 mm. Dia.

MATERIAL TO BE CRUSHED

Pigments and Colours

TEMPERATURE (0C)

Ambient.

MOISTURE CONTENT

2-3 % - Non Sticky

CAPACITY

300 – 350 Kg. / hour.

MOTOR RECOMMENDED

10 H.P.  1440 Rpm. Sq. Cage T.E.F.C.